- Is 3.08 a good gear ratio?
- How fast can you go with 4.10 gears?
- Are 3.73 gears good for highway?
- Which gear ratio is faster?
- What gear ratio is best for 35 in tires?
- Which Gear has more torque?
- How much does it cost to get 4.10 gears installed?
- Do 4.10 gears make a difference?
- Are 4.11 gears good?
- Is 3.42 or 3.73 better?
- What gear ratio is best for fuel economy?
- Are 4.10 gears good for 35s?
- Is 3.55 or 3.73 gears better?
- Are 3.73 or 4.10 gears better?
- What is a good gear ratio for highway driving?
- How much does a gear swap cost?
- How much does it cost to change gears in a truck?
- What are 4.10 gears good for?
Is 3.08 a good gear ratio?
Yes, you are exactly right, towing with a 6 speed with 3.08s is still better than towing with a 4 speed and 3.73s.
If its a heavy trailer, you will probably never use 5th and 6th gears, but who cares.
crank turns to rotate the rear wheels once that counts..
How fast can you go with 4.10 gears?
On the highway a 4.10 gear will only be about 200 rpms more at around 75 then a 3.73. And with the Automatic you will need all the help you can get. Top Speed of our GT’s should be between 145 and 155 depending on the tune of your chip if you have one.
Are 3.73 gears good for highway?
Rear end gears (2.79’s, 3.00’s, 3.25’s, etc) are great for freeway driving, bit not good for 0-60 MPH or accelerating from a dead stop. Shorter gears (higher numbers) are much better suited for accelerating, such as 3.55, 3.73, 3.91’s, 4.11’s etc. Always remember, for very “give” there is a “take”.
Which gear ratio is faster?
A lower (taller) gear ratio provides a higher top speed, and a higher (shorter) gear ratio provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential.
What gear ratio is best for 35 in tires?
Depending on the axle, the next lowest ratio from a 4.10:1 is most likely the 4.56:1, which should be selected for towing and performance. Because of the extra weight associated with off-road tires, we usually recommend going with a performance-minded gear ratio for any tire size above 35 inches.
Which Gear has more torque?
The associated torque is quantified by multiplying the circumferential component by the radius; larger gears experience a greater amount of torque, whereas smaller gears experience less torque. Similarly, the torque ratio is equal to the ratio of the gears’ radii.
How much does it cost to get 4.10 gears installed?
Installation costs will vary, but a good rule of thumb is between $250 and $300. Be sure to work with a reliable shop that you trust for installations. You can also save money on your installation labor by having your Trac-Lok rebuilt at the same time as your gears are installed, see drop down option above.
Do 4.10 gears make a difference?
Installing 4.10 gears improves the car’s performance on the track but with negligible effects to the highway driving. … Switching from a gear set of 3.55 or 3.73 to 4.10 gears will affect your gas mileage slightly as your engine will be turning more times to rotate the rear wheels once.
Are 4.11 gears good?
4.11:1 is a “lower” gear ratio, meaning you have more torque, lower top speed, and you will generally consume more fuel. Usually people put 4.11:1 gears in trucks to be used off-road for the extra torque and the better “crawling” capabilities.
Is 3.42 or 3.73 better?
3.73 is 9% higher than 3.42. That means your RPMs at any given speed will be 9% higher. You should be able to accelerate about 9% faster, in the lower gears at least. Your maximum speed in each gear will decrease by 9%.
What gear ratio is best for fuel economy?
For instance, a 3:31 gets better fuel economy than a 3:73. On the other hand, a 3:73 or perhaps a 4:10 will tow much more, while fuel economy greatly drops. The most popular rear end ratio in trucks today is the 3:55, which sort of averages towing power and fuel economy.
Are 4.10 gears good for 35s?
Yes, I’m running 35s on stock 4.10s here, with auto tray. It’s fine.
Is 3.55 or 3.73 gears better?
3.55 will give you a little better gas mileage on the highway and slightly more highway oriented performance. 3.73 may be better for towing, lower end power (off the line acceleration), and may result in worse gas mileage on the highway.
Are 3.73 or 4.10 gears better?
The difference between a 3.73 vs 4.10 gear ratio can cause many questions for the automotive enthusiast….3.73 VS 4.10 Ratio.3.73 Ratio4.10 RatioNot as fast off of the lineQuicker Off The LineLower TorqueHigher TorqueBetter Gas MileageDecreased Gas MileageHigher Top SpeedLower Top SpeedMar 3, 2021
What is a good gear ratio for highway driving?
If your highway driving includes a lot of mountain terrain then I’d also go to 3.73 but otherwise 3.55 will afford you the best fuel economy. The opinion on the best gears depends on the goal: Off the line – go to lower gears (3.73, 4.10, etc…) Fuel Mileage -go for higher gears (3.08, 3.31, etc..)
How much does a gear swap cost?
Most gear installs cost around $150 to $200 for a good price not including the gears. Yours will be a little bit more since they are doing the bearings but as stated call around and see what you get for prices.
How much does it cost to change gears in a truck?
As to cost, depending on where it is done, it could cost you as little as 750 dollars to as much as 1500 dollars per axle. Best prices would probably be a performance shop that does it all the time.
What are 4.10 gears good for?
A 4.10 axle ratio will provide improved acceleration in stop and go city traffic. A lower gear (higher numerical) ratio provides more low-speed wheel torque, which makes it easier to get the vehicle moving when pulling a trailer or carrying a heavy load.