# Question: How Do I Calculate Torque?

## How much force is needed to move a car?

3) An applied force of 30 to 50 pounds per scale (total applied force of 90 to 150 pounds) usually works well.

4) Make certain students push horizontally.

If they push at an angle, only the horizontal component of the applied force goes into accelerating the car..

## How much power does it take to move a car?

There is a direct conversion between horsepower and watts: 745.7 watts is 1 horsepower. Car motors for modern vehicles range from about 50 horsepower to 500 horsepower or more. An average medium size family car might have a 150 HP motor. To duplicate that with an electric motor you would need 111,855 watts of power.

## What is the formula to calculate torque?

A practical way to calculate the magnitude of the torque is to first determine the lever arm and then multiply it times the applied force. The lever arm is the perpendicular distance from the axis of rotation to the line of action of the force. and the magnitude of the torque is τ = N m.

## How do you calculate torque when moving a car?

The required tractive torque of the motor shall be equal to the tractive torque at wheel, Tw = Ft. rw , (i.e. Tractive Torque = Tractive Force x mean wheel radius). So you must determine the acceleration required to reach you designed speed.

## How much torque is 1 horsepower?

The definition of 1 Horsepower is displacing 1 lb. 33,000 ft. in one minute or 33,000 lb-ft / minute.

## Does higher torque mean faster acceleration?

A car with more hp than torque will always be quicker since this gives a car acceleration and speed. … Higher torque doesn’t mean one vehicle will necessarily be faster than another, though. For example, a Ford F-250 makes 925 lb-ft of torque, while a Honda S2000 has just 162 lb-ft.

## How many rpm is 1 HP?

When the 1HP pump is operating in the optimal range (approx. 2700 rpm) the 3600 RPM motor is still be producing 1.5 ft/lbs of torque, while the 1800 RPM motor’s output will be somewhere between 1.5 and 3 ft/lbs.

## What is maximum torque?

The primary use of torque is to make the car accelerate, and the number usually quoted is the maximum torque of the internal-combustion engine at the crankshaft – and that’s usually higher than the amount at the wheels. … But it’s not just about speed, torque is also important when vehicles get heavier and larger.

## What is 1 Nm of torque?

Torque is measured in Newton metres (Nm) or you might see the imperial measurement of lb-ft (pounds-feet). If you want to calculate the conversion for yourself, 1 Nm is equivalent to 0.738 lb/ft. See the pulling power of torque in our tug of war video.

## What is a good amount of torque in a car?

100 to 400 lb.-ftEngines in mainstream cars and trucks typically generate 100 to 400 lb. -ft of torque. That torque is created by the pistons within an engine as they reciprocate up and down on the engine’s crankshaft, causing it to rotate (or twist), continuously.

## Is more torque better in a car?

Horsepower means your car can go faster, and torque means…? … Because there is generally a limit on how fast you can spin an engine, having higher torque allows for greater horsepower at lower rpms. This is also why people talk about “low-end torque” being important for better power at slower speeds.

## What is unit for torque?

newton-metreTorque/SI units