 # Question: How Much Electricity Does A 30 Hp Motor Use?

## How much is an electric motor for a car?

Basically, electric conversion involves removing the entire internal combustion engine from a vehicle, installing an electric motor in its place, and also adding a large bank of batteries.

A conversion will cost you about \$6000 in parts, and about \$1000-\$3000 for batteries and installation..

## How much does it cost to run a 20 hp motor?

In our example, if the average cost of kWh is 11.2 cents, then the cost of running this 20HP motor would be 4230 x 0.112, or \$474 per month.

## How much power does a 50 hp electric motor use?

So — 37,300 Watts / 0.92 = ~ 40,500 Watts is required to be input to the motor to get the 50 HP output. In terms of kiloWatts (kW), — the terms that your electric company charges you — this is approximately 40.5 kW.

## How much power does a 1 hp motor consume?

If the motor is fully loaded, it will provide output power of 1 HP = (1 X 0.746) kW = 0.746kW. Electrical Input Power = (Output Power/Efficiency). Assuming 90% efficiency, Input Power = 0.746/0.9 = 0.83kW.

## How much power does a 100 hp motor use?

80,000 wattsData Logger information imported into a spreadsheet for analysis. This 100-horsepower centrifugal pump motor, if fully loaded, should be consuming nearly 80,000 watts (80 kW).

## How is motor running cost calculated?

W is the power consumption in watts. For example, if the electric motor uses 50 amps at 240 volts, the wattage is 50 x 240 x 1.73, or 20,760 watts. Electricity costs are based on kilowatts (kW), so divide watts by 1000 to convert to kilowatts (20,760 wats/1000 = 20.76 kW). Record the time the motor is in operation.

## How do you calculate the power of a motor?

Power = (Force x Distance) / Time For electric motors, power or horsepower can be calculated from the torque and speed. For example, if you have a motor rated for 3,000 RPM and 6 in-lbf then the horsepower is calculated below.

## How much electricity does a 10 hp motor consume?

So a 10 hp motor will need 7680 watts when operating. In one hour the motor will consume 7.680 KWatt hours. If the units are charged at 10 cents each then then that equates to 10x 7.680 / 100 Dollars = 76.8 cents.

## What does 1 hp motor mean?

The horsepower (hp) is a unit in the foot-pound-second ( fps ) or English system, sometimes used to express the rate at which mechanical energy is expended. … A power level of 1 hp is approximately equivalent to 746 watt s (W) or 0.746 kilowatt s (kW). To convert from horsepower to watts, multiply by 746.

## How much electricity does a water motor use?

To give you a rough estimate the average rated power of water pump is from 250 watts to 1500 watts. Smaller the water pump, less is the wattage, less is the power consumption, hence low is the discharge and head. If the rated power is given in horse power (hp) then convert it to watt by multiplying it with 746.

## What is rated power of motor?

Power rating for electrical machines indicates the required supply voltage for smooth running of that machine, it also shows the permissible maximum amount of current which can easily flows through the machine and there will be a chance of breakdown in the machine if those parameters goes beyond this limit.

## How much does it cost to run a 3/4 HP motor?

3/4 Hp is 3*0.746/4 = 0.56 KW. If you run it for 1 hour it will cost 5.6 cent. If you run it for 24 hour, it will be 24 * 5.6 = 135 cents or \$1.35.

## How many watts does a 25 hp motor use?

18,642.5 Watts25 hp = 18,642.5 Watts according to my calculator. 18.6 KW * \$. 08 = \$1.488 per hour. At 18.6KW / 220V the motor draws 84.5 amps.

## How much power does a 7.5 hp motor consume?

Let us assume that motor is operating at full load so it will consume 7.5 hp or 5.59 or 5.6 kW approx. Let us assume motor has efficiency of 90 %, motor at full load gives around 90 % efficiency, so the power input to motor is 5.6/0.9=6.22 kW. Energy consumption in 2 hrs = 6.22×2=12.44 KWh or 12.44 unit.

## How is motor horsepower calculated?

The quickest method to closely estimate motor horsepower is to use a digital clamp meter to measure current and voltage to the motor, and then perform a simple calculation. Use this formula to estimate motor horsepower. Horsepower(hp)= Voltage x Amperage x % EFF x power factor x 1.73/746.