- How much can a 5.3 L V8 tow?
- Are 3.73 or 4.10 gears better?
- Is 3.42 or 3.73 better?
- Is 3.55 or 3.73 gears better?
- Are 4.11 gears good?
- Is 3.08 a good gear ratio?
- How fast can you go with 4.10 gears?
- What gear ratio is better for towing?
- Are 3.73 gears good for highway?
- Does gear ratio affect horsepower?
- What gear ratio do I need for 35 inch tires?
- How much does it cost to get 4.10 gears installed?
- Are 4.10 gears good for 35s?
- What is the best gear ratio for a street rod?
- Is a 4.10 gear ratio good for towing?
- What gear ratio is best for fuel economy?
- Does 3.73 gears make a difference?
- Are 3.73 gears good for 35 tires?
- How much does it cost to change gear ratio?
- What are 410 Gears good for?
- Is it better to have a higher or lower gear ratio?
How much can a 5.3 L V8 tow?
5.3L V8 Engine — produces 355 hp and 383 lb-ft of torque.
Towing capacity is boosted to 11,600 pounds..
Are 3.73 or 4.10 gears better?
The difference between a 3.73 vs 4.10 gear ratio can cause many questions for the automotive enthusiast….3.73 VS 4.10 Ratio.3.73 Ratio4.10 RatioNot as fast off of the lineQuicker Off The LineLower TorqueHigher TorqueBetter Gas MileageDecreased Gas MileageHigher Top SpeedLower Top SpeedMar 3, 2021
Is 3.42 or 3.73 better?
3.73 is 9% higher than 3.42. That means your RPMs at any given speed will be 9% higher. You should be able to accelerate about 9% faster, in the lower gears at least. Your maximum speed in each gear will decrease by 9%.
Is 3.55 or 3.73 gears better?
3.55 will give you a little better gas mileage on the highway and slightly more highway oriented performance. 3.73 may be better for towing, lower end power (off the line acceleration), and may result in worse gas mileage on the highway.
Are 4.11 gears good?
4.11:1 is a “lower” gear ratio, meaning you have more torque, lower top speed, and you will generally consume more fuel. Usually people put 4.11:1 gears in trucks to be used off-road for the extra torque and the better “crawling” capabilities.
Is 3.08 a good gear ratio?
Yes, you are exactly right, towing with a 6 speed with 3.08s is still better than towing with a 4 speed and 3.73s. If its a heavy trailer, you will probably never use 5th and 6th gears, but who cares? crank turns to rotate the rear wheels once that counts.
How fast can you go with 4.10 gears?
On the highway a 4.10 gear will only be about 200 rpms more at around 75 then a 3.73. And with the Automatic you will need all the help you can get. Top Speed of our GT’s should be between 145 and 155 depending on the tune of your chip if you have one.
What gear ratio is better for towing?
A 3.73 ratio is suitable for regular light towing. If you plan on towing a fifth-wheel trailer or anything heavier than 5,000 pounds, you should consider a 4.1 axle ratio. A 4.1 ratio allows a towing vehicle to start moving without as much throttle.
Are 3.73 gears good for highway?
Rear end gears (2.79’s, 3.00’s, 3.25’s, etc) are great for freeway driving, bit not good for 0-60 MPH or accelerating from a dead stop. Shorter gears (higher numbers) are much better suited for accelerating, such as 3.55, 3.73, 3.91’s, 4.11’s etc. Always remember, for very “give” there is a “take”.
Does gear ratio affect horsepower?
Here’s what the numbers mean, how they relate, and how they affect performance: Torque is a measure of the rotational force applied to the engine’s crankshaft and ultimately to the drive wheels. … A higher numeric axle ratio (4.11:1) keeps the engine running in the higher horsepower range, thus improving performance.
What gear ratio do I need for 35 inch tires?
Gear Ratio And Tire Size Calculator3.315.7134″2126366835″2065356336″2008346437″1954337014 more rows
How much does it cost to get 4.10 gears installed?
Installation costs will vary, but a good rule of thumb is between $250 and $300. Be sure to work with a reliable shop that you trust for installations. You can also save money on your installation labor by having your Trac-Lok rebuilt at the same time as your gears are installed, see drop down option above.
Are 4.10 gears good for 35s?
Yes, I’m running 35s on stock 4.10s here, with auto tray. It’s fine.
What is the best gear ratio for a street rod?
If it’s a daily driver, chances are you’ll want to keep your gear ratio at 3.23 or below for optimal performance and lower cruising RPMs. For street and strip applications, a popular choice ranges between 3.42s and 3.90s, giving you that extra oomph on the track while maintaining a tolerable cruising RPM on the street.
Is a 4.10 gear ratio good for towing?
FACT: A 4.10 axle ratio is ideal for towing heavy loads in a mix of city and highway driving and when towing on varied or steep grades. A 4.10 axle ratio will provide improved acceleration in stop and go city traffic. … A 4.10 rear axle ratio is ideal for towing larger 5th Wheel or Gooseneck trailers.
What gear ratio is best for fuel economy?
For instance, a 3:31 gets better fuel economy than a 3:73. On the other hand, a 3:73 or perhaps a 4:10 will tow much more, while fuel economy greatly drops. The most popular rear end ratio in trucks today is the 3:55, which sort of averages towing power and fuel economy.
Does 3.73 gears make a difference?
Registered. Yes, while it’s a noticeable improvement in seat of the pants acceleration, you will run out of rpms quicker with 3.73s. In the long run you’ll find yourself looking for more engine rpms. The increased torque multiplication of lower gears will help make better use of a higher revving engine combo.
Are 3.73 gears good for 35 tires?
You will be fine. Just gonna lose mpg and slow your truck down. I have run 35s with 3.73s and no issues at all. In fact, my recent Plat had a 4-inch lift, heavy 34.5 inch Nitto Trails, and 3.55 gears, and ran great!
How much does it cost to change gear ratio?
As to cost, depending on where it is done, it could cost you as little as 750 dollars to as much as 1500 dollars per axle. Best prices would probably be a performance shop that does it all the time.
What are 410 Gears good for?
Most late model Mustangs and many other sports cars come equipped with standard 3.55 gears in their rear differential, however by adding 4.10 gears they can effectively make their drag times faster and deliver more power to the wheels faster.
Is it better to have a higher or lower gear ratio?
A lower (taller) gear ratio provides a higher top speed, and a higher (shorter) gear ratio provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential.