Quick Answer: Does Softwood Create More Creosote?

What type of wood is best for indoor fireplace?

Hardwoods such as maple, oak, ash, birch, and most fruit trees are the best burning woods that will give you a hotter and longer burn time.

These woods have the least pitch and sap and are generally cleaner to handle..

What kind of wood is best for fireplace?

Some of the best slow-burning and fragrant wood for your fireplace include:Apple.Beech.Black Locust.Blackthorn.Bitternut Hickory.Cherry.Hawthorn.Hophornbeam.More items…

What will dissolve creosote?

Sodium chloride, also known as table salt, is a simple chemical that is easy to find. Put a little salt in the fire while it is burning. The salt combines with the water in the burning wood to create a weak acid that travels up the chimney and dissolves small amounts of creosote.

Can you burn off creosote?

A hot fire will burn out any creosote that may have formed overnight. … They either burned the creosote before it could accumulate or kept the chimney temperature above 250ºF so that the smoke escaped without its gases condensing. The burn was controlled by the amount of wood in the stove.

Can wood be too old to burn?

Old wood will burn just fine but it will have less heat in it than the same wood would have that is only seasoned a couple of years.

Is burning cardboard bad for chimney?

While it’s easy to ignite and may seem like a good way to help get a fire started, burning cardboard can be dangerous. Because cardboard is treated with chemicals and often contains inks, it can release them into the air when burned. … Or, more commonly, they can float up into your chimney and cause a chimney fire.

How dangerous is creosote?

Creosote is highly flammable. When creosote inside your chimney gets too thick; a stray spark, extreme heat or unexpected flareup from the fireplace can cause it to ignite. This then leads to a damaging and potentially dangerous chimney fire.

Do potato peels clean chimneys?

Toss the potato peels carefully into a burning fireplace. The potato peels burn at high energy and will help push the soot and creosote out of the chimney.

Can firewood be too dry?

It’s not something that most people complain about very often, but yes, wood can be too dry and burn faster than would be the case at an optimal 10-15% MC.

What is the best creosote remover?

Our Top PicksBest Overall. MEECO’S RED DEVIL 5-pound Creosote Destroyer. … Runner-up. Gardus SLK-24 SootEater Rotary Chimney Liner Cleaning. … Best Bang for the Buck. Rutland Products 2 lb Creosote Remover. … Best for Mild Creosote. … Best Creosote Spray. … Best Creosote Remover Log. … Best for Glazed Creosote.

How long does it take for creosote to build up?

It typically takes between six months and one year for cut wood to get to a low moisture content.

Is it OK to burn 2×4 in fireplace?

NO! Don’t do it – the lumber is so dry, and the resin in the pine will burn with flames so high that they will go up into your chimney. It’s a good way to catch your house on fire. Watch out for chimney fires.

What wood creates the most creosote?

Softwoods like fir, pine and cedar make more smoke, and therefore more creosote.

What causes excessive creosote buildup?

Control creosote buildup When wood is burning rather slowly, the smoke usually contains a substance called creosote that collects in the relatively cool chimney flue. The main causes of creosote buildup are: Wet or unseasoned wood. Incomplete combustion.

What is the slowest burning wood?

OakOak. Oak is the slowest wood to season, at approximately 2.5cm a year and ideally should be seasoned for a minimum of two years. Because of its density, it is a wood that’s slow to burn as firewood and is best used in a mix of faster-burning logs. This wood can help to keep the fire burning at night if required.

Does firewood ever go bad?

As long as firewood is left to sit in the right conditions and free from moisture it won’t go bad for many years. Once firewood has been seasoned for the right amount of time it should be stored off the ground, under a form of cover and open to the atmosphere to ensure that it doesn’t rot.

Will burning aluminum cans remove creosote?

Burning aluminum cans does not get rid of the creosote, it merely turns it to flakes and powder. It remains necessary to physically clean the chimney with the correct chimney brushes.

Does chimney sweeping remove creosote?

Chimney sweeping logs are infused with chemicals that are released when the log is burned. The chemicals cling to the creosote, drying it up and preparing it for removal. Sometimes this won’t be necessary, especially if you keep your chimney clean all year round.

What temp does creosote form?

In the burning process, wood starts to chemically break down at 500oF, producing volatile gases including creosote. These gases burn at about 1100’F; if that temperature is not roached, the gases will escape up the chimney, resulting in the loss of much of the wood’s energy.

What kind of wood should you not burn in a fireplace?

Yes, poison oak, ivy, sumac and the like are dangerous to burn as the smoke from these plants can contain urushiol, the irritant that causes reactions to contact with these plants. Additionally, Oleander and Mexican Elder trees are highly toxic, and the smoke is poisonous when inhaled.