Quick Answer: How Do You Control Motor Torque?

How do you reduce motor torque?

Theoretically, torque is reduced by the ratio of the base speed divided by the higher speed (60 hertz / 90 hertz = 67%).

In real applications, other factors (increased bearing friction, increased fan loading, additional rotor windage, etc.).

What determines motor torque?

The required torque is calculated by multiplying the sum of load torque and acceleration torque by the safety factor. When the required torque for the motor varies over time, determine if the motor can be used by calculating the effective load torque.

How do you get more torque from an electric motor?

To increase the torque … that a bit harder. All you can do, electrically (as you can do it mechanically via gears), is to reduce the source impedance to maximise the current that can be delivered for a given stator impedance. Rewind it with more turns of thinner wire.

Is it better to have higher torque at lower rpm?

Running at lower RPMs equates to higher torque and thus lower horsepower, while making higher RPM power outputs less torque and higher top horsepower. In a straight line race, higher RPMs take precedence. NASCAR racecars operate at very high RPMs.

What is the difference between speed control and torque control?

With pure speed control, you twist the throttle and it feeds more voltage at the maximum current it can do. With pure torque control, you twist the throttle a bit, and it adds more current, turning the motor harder.

How do you make an electric motor more powerful?

We can increase the turning force (or torque) that the motor can create in three ways: either we can have a more powerful permanent magnet, or we can increase the electric current flowing through the wire, or we can make the coil so it has many “turns” (loops) of very thin wire instead of one “turn” of thick wire.

Why electric motors have more torque?

The benefit of using an electric motor to power a car is that it can help drivers reach maximum torque from 0 RPM. This is because electric motors use an electric current, which moves through a magnetic field and creates the force necessary to rotate the armature and get the car moving.

How do you control torque?

Torque ControlTorque can be controlled directly by controlling the armature current. Fig. … In Fig. 10.8a, a phase-controlled rectifier, in combination with a dc-link filter inductor, can be used to create a variable dc-link current which can be applied directly to the armature terminals of the dc motor.In Fig.Jul 6, 2009

How do you check motor torque?

Keep it simple. To measure the torque simply create a transversal arm attached to the motor using a known length. Let the whole motor free to turn (not the shaft, the outside case) along with the attached arm. The arm tip, opposed to where it’s attached to the motor, can then be placed on a balance.

How is rated torque calculated?

Torque (lb.in) = 63,025 x Power (HP) / Speed (RPM)Power (HP) = Torque (lb.in) x Speed (RPM) / 63,025.Torque (N.m) = 9.5488 x Power (kW) / Speed (RPM)Power (kW) = Torque (N.m) x Speed (RPM) / 9.5488.

Why does torque decrease at high rpm?

At high RPM, torque drops off primarily from intake and exhaust flow restriction. Volumetric Efficiency declines because the engine can’t breathe any faster. Mechanical efficiency also declines at higher RPM, due to increased frictional resistance. This further reduces torque at the output.

How does torque control work?

Direct torque control (DTC) is one method used in variable-frequency drives to control the torque (and thus finally the speed) of three-phase AC electric motors. This involves calculating an estimate of the motor’s magnetic flux and torque based on the measured voltage and current of the motor.

How much torque does a 1 hp motor have?

The 3600 RPM, 1HP motor produces 1.5 ft. lbs. of torque at 3600 RPM. So if your 1HP pump was operating at 1800 RPM, the 1800 RPM motor would be producing 3 ft.

What is torque control on a drill?

All cordless drill drivers deliver torque, but only some have a feature called torque control, which if used correctly, prevents the drill driver from delivering too much torque at one time when driving screws. Torque control is also known as an adjustable clutch.

What is better to have torque or horsepower?

Torque, simply, is the ability of a vehicle to perform work — specifically, the twisting force applied by the crankshaft. Horsepower is how rapidly the vehicle can perform that work. … Because there is generally a limit on how fast you can spin an engine, having higher torque allows for greater horsepower at lower rpms.