# Quick Answer: What Is The Rated Torque?

## What is the starting torque?

Starting torque is the torque transferred by the shaft coupling during run-up (see Start-up process).

It is calculated based on the ratio of power (P) to angular velocity (ω) and is represented as a rotational speed function..

## Why does torque drop at high rpm?

At high RPM, torque drops off primarily from intake and exhaust flow restriction. Volumetric Efficiency declines because the engine can’t breathe any faster. Mechanical efficiency also declines at higher RPM, due to increased frictional resistance. This further reduces torque at the output.

## What is relation between speed and torque?

Torque is the rotational equivalence of linear force. Speed measures the distance covered in unit time. The relation between torque and speed are inversely proportional to each other. The torque of a rotating object can be mathematically written as the ratio of power and angular velocity.

## How do you increase engine torque?

To increase the torque … that a bit harder. All you can do, electrically (as you can do it mechanically via gears), is to reduce the source impedance to maximise the current that can be delivered for a given stator impedance. Rewind it with more turns of thinner wire.

## What is motor torque formula?

These equations are for estimation only, friction, windage, and other factors are not taken into consideration. Calculator-1. Known variables: Horse Power and Speed in RPM. Torque is the action of a force producing or tending to produce rotation. Torque = force x distance.

## Which is better torque at low rpm or torque at high rpm?

Running at lower RPMs equates to higher torque and thus lower horsepower, while making higher RPM power outputs less torque and higher top horsepower.

## What is stall torque and rated torque?

The rated torque is the maximum continuous torque that the motor produces at rated RPM when working normally and without overheating, whereas the stall torque is produced by the motor when RPM is 0 while the load is attached or at starting. …

## How is rated torque calculated?

Torque (lb.in) = 63,025 x Power (HP) / Speed (RPM)Power (HP) = Torque (lb.in) x Speed (RPM) / 63,025.Torque (N.m) = 9.5488 x Power (kW) / Speed (RPM)Power (kW) = Torque (N.m) x Speed (RPM) / 9.5488.

## What is pull out torque?

Pull-out torque is the maximum torque that can be delivered without losing steps. It reaches its maximum at the lowest frequency or speed, and decreases as frequency increases. … Pull-in torque is the maximum torque at which a motor can start rotating at a given frequency.

## How much torque does a 1 hp motor have?

The 3600 RPM, 1HP motor produces 1.5 ft. lbs. of torque at 3600 RPM. So if your 1HP pump was operating at 1800 RPM, the 1800 RPM motor would be producing 3 ft.

## What is the starting torque of a motor?

The starting torque is the required amount of energy that is used to overcome the inertia of standstill. That is also known as pull-up torque it is the minimum torque generated by a motor to accelerate it from static position to the operating speed.

## Is torque proportional to power?

The relation between torque and power is directly proportional to each other. … The power of a rotating object can be mathematically written as the scalar product of torque and angular velocity.

## What is torque current?

Torque current is the portion of the total current to the motor that is in phase with the output voltage. … The efficiency of any motor will improve if more of the total current is in phase with the output voltage.

## What is Nm torque?

One newton-metre is the torque resulting from a force of one newton applied perpendicularly to the end of a moment arm that is one metre long. … One newton-metre is equal to the torque resulting from a force of one newton applied perpendicularly to the end of a moment arm that is one metre long.

## Is torque directly proportional to speed?

Torque is inversely proportional to speed. Thus, when speed increases, torque will decrease.

## How do you calculate engine torque?

When you choose torque, this calculator will measure the approximate torque of an engine based on the horsepower, multiplied by 5,252 (conversion between foot-pounds and horsepower), divided by the RPM of the engine. For example, if your engine has 350 horsepower then the torque would be 367 foot-pounds, at 5,000 RPM.

## What is rated torque of DC motor?

The rated torque takes into account the spinning (magnetic) losses and thermal (I2T) losses of the motor. At 0 speed, these losses are 0 and thus the stall torque is higher than the rated torqued.

## What is maximum torque in induction motor?

The developed torque is maximum when the rotor resistance per phase is equal to the rotor reactance per phase under running conditions. By putting the value of sX20 = R2 in the equation (1) we get the equation for maximum torque. The above equation shows that the maximum torque is independent of the rotor resistance.

## Which motor is used for high starting torque?

DC motorDC motor has high starting torque.In a series motor the same current flows through the armature and the field winding. The torque is therefore proportional to the square of the current.

## Is current proportional to torque?

The current in the output of a DC drive is the motor armature current, which is proportional to torque.

## What is rated torque of induction motor?

Torques describes and classifies electrical motors Torque is the turning force through a radius – with the units Nm in the SI-system and the units lb ft in the imperial system. The torque developed by an asynchronous induction motor varies when the motor accelerates from zero to maximum operating speed.