Quick Answer: Which Motor Is Used Where High Starting Torque And Wide Speed Range Control Is Required?

Which motor is used for high starting torque and high speed?

Universal motorsUniversal motors have high starting torque, can run at high speed, and are lightweight and compact.

They are commonly used in portable power tools and equipment, as well as many household appliances.

They’re also relatively easy to control, electromechanically using tapped coils, or electronically..

Which applications require high starting torque?

Which of the following application requires high starting torque?A. Lathe machine.Centrifugal pump.Locomotive.Air blower.

Why starters are required in a DC motor?

Starters are used to protect DC motors from damage that can be caused by very high current and torque during startup. They do this by providing external resistance to the motor, which is connected in series to the motor’s armature winding and restricts the current to an acceptable level.

How do I lower the RPM on my electric motor?

A couple of things you can do:Use gears to change ratio of speed, which is what you’re going to do. … Use a stepper motor, which are commonly used for high-torque, low RPM applications.Find some sort of PWM control circuit to slow it down, although you probably won’t be able to get it down to 5-10RPM.

Which of the following motor has high starting torque?

24. The capacitor-start motor has a high starting torque.

What is low starting torque?

So starting torque is low in induction motors. To get maximum starting torque, resistance is added to the rotor while starting slip ring motors, which is reduced gradually as motor picks up the speed. … So starting torque is low in induction motors.

Why is DC motor current so high?

Answer: The starting current is high as there is no back EMF or counter EMF present in the armature circuit because atstarting counter EMF is zero. … It’s armature has very less resistance due to this it need more current at starting time. Hence DC starters are used to limit the starting current ofmotor.

Which motor has the poorest speed control?

DC motorWhich of the following DC motor has the poorest speed control? Explanation: DC series motor at no load condition gives infinite speed ideally. Practically it will damage all the armature circuit. Thus, as the load is reduced speed of the motor will go on increasing rapidly.

What are 3 types of motor controls?

There are four basic motor controller and drive types: AC, DC, servo, and stepper, each having an input power type modified to the desired output function to match with an application.

What will happen when DC motor is connected to AC supply?

1. What will happen if DC shunt motor is connected across AC supply? Explanation: In case of parallel field connection, it won’t rotate at all and will start humming and will create vibrations, as a torque produced by positive and negative cycle will cancel out each other. DC motor will be heated up and it may burn.

Why is the DC motor preferred over AC motor?

DC motors have the advantage of: higher starting torque, quick starting and stopping, reversing, variable speeds with voltage input and they are easier and cheaper to control than AC. AC motor advantages include: lower power demand on start and minimal maintenance.

Which motor has wide range of speed control?

Oriental Motor offers three product groups (AC speed control motors, brushless DC speed control motors, and inverter units) for use in a wide range of speed control applications.

Which DC motor has maximum self loading property?

Which DC motor has got maximum self-loading property? Explanation: A differentially compound DC motor, flux reduces so sharply at small increase in load at higher values of load. It is advisable that motor should not be used beyond some load value, as it may damage itself by self-loading. 5.

Which switch is used for the automatic control of the motor?

HOA selector switchWhich switch is used for the automatic control of the motor? Because the HOA selector switch is a maintained switch, it operates in the same manner as the local-remote switch example.

Which of the following DC motors is suitable for high starting torque?

Thus, DC series motor is used in conveyors as it provides very high starting torque, which is practically 5 times the rated torque.

Which DC motor is used for conveyor?

Based on the above answers a Brushless DC Motor/Gearmotor with AC-Powered Speed Control or a 3-Phase AC Motor/Gearmotor with AC-Powered Speed Control would be the best choice for this application.

Which motor has high starting current?

Induction MotorStarting Current in Induction Motor: Starting current of induction motor is as high as 5 to 7 times the normal full load current.

How do you reduce starting current?

Some of the techniques used to reduce the starting current of a squirrel induction motor:Soft starting (voltage control)Variable Frequency Drives (Voltage and frequency control)Star/Delta Starting.Stator impedance and/or resistance starting.Autotransformer Starting.Aug 26, 2015

Why does motor current increase with load?

In an electric motor, almost all types, the current is proportional to the torque. If the load increases, in other words, the torque increases and the current will increase. The magnetic field in a motor are related to the voltages. The rotor produces a field that turns at the same speed as the supply.

Which DC motor is used for machine tools?

DC shunt motor1. For machine tools, which DC motor can be used? Explanation: Shunt characteristics is the speciality of DC shunt motor. The speed of the motor almost remains constant on various loads, thus it suits perfectly to the application, where speed requirement is constant like in machine tools.