What Is A Good Gear Ratio For Highway Driving?

Are 4.10 gears good for highway?

Installing 4.10 gears improves the car’s performance on the track but with negligible effects to the highway driving.

Switching from a gear set of 3.55 or 3.73 to 4.10 gears will affect your gas mileage slightly as your engine will be turning more times to rotate the rear wheels once..

Are 4.88 gears good for highway?

4.88 are great… but you’ll be reving it out on the freeway just to stay at speed. 4.56 are more “well rounded.”

Is 3.42 or 3.73 better?

3.73 is 9% higher than 3.42. That means your RPMs at any given speed will be 9% higher. You should be able to accelerate about 9% faster, in the lower gears at least. Your maximum speed in each gear will decrease by 9%.

What is the difference between 3.73 and 4.30 gear ratio?

A 4.30 ratio will give you better low end acceleration but also lower gas mileage. A 3.73 ratio will still provide decent acceleration but will also provide a tad better mileage plus give you a higher top end speed.

Is 3.55 or 3.73 gears better?

3.55 will give you a little better gas mileage on the highway and slightly more highway oriented performance. 3.73 may be better for towing, lower end power (off the line acceleration), and may result in worse gas mileage on the highway.

Are 3.73 gears good for 35 tires?

You will be fine. Just gonna lose mpg and slow your truck down. I have run 35s with 3.73s and no issues at all. In fact, my recent Plat had a 4-inch lift, heavy 34.5 inch Nitto Trails, and 3.55 gears, and ran great!

Do 3.73 gears make a difference?

Registered. Yes, while it’s a noticeable improvement in seat of the pants acceleration, you will run out of rpms quicker with 3.73s. In the long run you’ll find yourself looking for more engine rpms. The increased torque multiplication of lower gears will help make better use of a higher revving engine combo.

What gear ratio should I use for 33 inch tires?

Gear Ratio And Tire Size Calculator3.317.1732″2259489433″2191474534″2126460635″2065447414 more rows

Is 3.73 a good gear ratio?

FACT: A 3.73 axle ratio is ideal for towing heavy loads on flat terrain and will produce increased fuel economy during steady-state, long-distance highway driving.

How fast can you go with 4.10 gears?

On the highway a 4.10 gear will only be about 200 rpms more at around 75 then a 3.73. And with the Automatic you will need all the help you can get. Top Speed of our GT’s should be between 145 and 155 depending on the tune of your chip if you have one.

Are 4.10 gears good for 35s?

Yes, I’m running 35s on stock 4.10s here, with auto tray. It’s fine.

What gear ratio is best for fuel economy?

For instance, a 3:31 gets better fuel economy than a 3:73. On the other hand, a 3:73 or perhaps a 4:10 will tow much more, while fuel economy greatly drops. The most popular rear end ratio in trucks today is the 3:55, which sort of averages towing power and fuel economy.

Is 3.08 a good gear ratio?

Yes, you are exactly right, towing with a 6 speed with 3.08s is still better than towing with a 4 speed and 3.73s. If its a heavy trailer, you will probably never use 5th and 6th gears, but who cares? crank turns to rotate the rear wheels once that counts.

What does a 4 11 gear ratio mean?

4.11 is a gear ratio.. basically it means that the the pinion or driveshaft will turn 4.11 times for each rotation of the tires. The higher the ratio, the more times the the the engine, transmission, transfer case, etc turns to make the wheels spin which yields less top speed but more low end torque (usually).

What is a good highway gear ratio?

Rear end gears (2.79’s, 3.00’s, 3.25’s, etc) are great for freeway driving, bit not good for 0-60 MPH or accelerating from a dead stop. Shorter gears (higher numbers) are much better suited for accelerating, such as 3.55, 3.73, 3.91’s, 4.11’s etc.

Are 3.73 or 4.10 gears better?

The difference between a 3.73 vs 4.10 gear ratio can cause many questions for the automotive enthusiast….3.73 VS 4.10 Ratio.3.73 Ratio4.10 RatioNot as fast off of the lineQuicker Off The LineLower TorqueHigher TorqueBetter Gas MileageDecreased Gas MileageHigher Top SpeedLower Top SpeedMar 3, 2021

What are 4.11 gears good for?

4.11:1 is a “lower” gear ratio, meaning you have more torque, lower top speed, and you will generally consume more fuel. Usually people put 4.11:1 gears in trucks to be used off-road for the extra torque and the better “crawling” capabilities.

Does higher gear ratio mean faster?

A lower (taller) gear ratio provides a higher top speed, and a higher (shorter) gear ratio provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential.

How do you choose a gear ratio?

To find the ideal selection, multiply the final drive ratio by the redline speed in fourth gear (152 mph) and divide that by the top track speed (140 mph). This would yield a theoretical 3.33—which is close enough to the nearest available final drive ratio of 3.36:1.